Blender artists community forum ge section

• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_293the format of the tutorial[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_294intended audience[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_294what skills Will you ned to know in advance[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_295starting a game project?[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_297downloadin g the correct versión of Blender[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_298the basics of the Blender UI, and how to quickly use it[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_301taquíng a closer look at the default scene[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_302interactin g with the 3d scene[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_304changing the 3d scene to perspective mode[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_305manipulati ng objects within the scene[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_307selecting other objects within the scene[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_308adding and removing objects in the scene[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_309fixing newly added 3d objects[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_311renaming objects[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_312practice, practice, practice[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_312learning the basics of using the Blender Game Engine[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_313setting up the default scene[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_316a very useful keypress sequence when working with the ge[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_319chosing the correct shading mode (or Draw type) for the ge[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_320the main game logic panel[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_322visually controlling the ge - sensors, Actuators, controller logic blocks[/url]
  
  • [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_322sensors[/url]
  • [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_322controller s[/url]
  • [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_323Actuators[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_323setting up a basic sensor, controller, actuator logic block sequence.[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_324breaquíng down the events in the ge system[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_325Making the default Cube move, using no physics[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_326controllin g the Cube vía the arrow keys[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_328adding in additional keyboard controls[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_329some ge house keping[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_330removing logic blocks and connections[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_331Making the default Cube move, using physics[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_333setting up the game scene[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_335Making a model Physical within the ge[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_340moving the Physical object within the ge[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_342controllin g the sphere using the arrow keys[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_345adding some obstacles into the level[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_345Making some of the objects Physical[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_347completion of the basic ge tutorial[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_350creating more complex game levels and interactions[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_351restarting the game when a goal is reached[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_357collecting pickups within the level[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_361counting the collected objects[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_368adding color to the levels using materials[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_371Making a stand-alone versión of the game[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_372overview of all of the sensor, controller and actuator logic blocks[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_372sensors[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_377controller s[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_379Actuators[/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_386continuing your Blender Game Engine [/url]
• [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_386additional links and tutoriales[/url]
  
  • [URL=https://www.foro3d.com/extras/tutoriales/blender/bsod_-_game_engine_tutorial.htm#linktarget_386blender artists community forum - ge section[/url]

Blender summer of documentation: learning the Blender Game Engine.

https://www.foro3d.com/extras/tutori...e_engine_0.jpg

the format of the tutorial.
this tutorial Will show the Reader how to create a simple 3d game from scratch in Blender. After completing the tutorial, the skills learned Will allow readers to extend the game levels.
it assumes no prior knowledge of Blender, so experienced users Will be able to Skip over certain sections.
only aspects of Blender that are relevant to making simple games Will be touched on. This Will cover only a fraction of Blender overall functionality, and Will hopefully encourage readers to use Blender for other purposes, such as creating 3d animations.
the tutorial should take around 2 hours to create a working 3d game from scratch.
intended audience.
this tutorial is aimed at anyone with an interest in making 3d games, but who may have no prior experience of either Blender or 3d.
it Will teach the basics of Blender Game Engine (ge) to both new Blender users, and a los to existing Blender users who may not yet have enjoyed this aspect of their favourite application.

Blender is a very powerful 3d modeling and animation Package, with an excellent and constantly improving built-in Game Engine. It is known as having quite a step learning curve, although when you get used to the workflow, it is very fast to work with.
what skills Will you ned to know in advance.
this tutorial is aimed at all levels of user, so it doesnt assume any prior knowledge of Blender.
if you are a new user with no experience of Blender, the tutorial Will step you th rouge the important aspects of Blender and the ge, so that you Will be able to create your own game.
if you are experienced with the Blender UI with regard to the important ge buttons and áreas, you might want to quickly scan over some of the initial sections.
starting a game project?
before posting your game Project announcement in a forum por favor read this.

Blender is a great application for all kinds of 3d artwork, be that stills, animations or even, games.
most of these projects are solo, but once in a while someone or a team of people decides/decide to recruit people to the development team or just want to let us know he/they is/are making a game. If you are working on a game and would like to recruit or just show your Project in development, por favor take the following into account:

1. we frequently get overly excited principiantes who mensaje about their Project to create a Morpg (or any other type of game, really, but mogs are the most common). In 99% of the cases, the Project never goes anywhere and the actual announcement itself would make any profesional representative cringe. That the reason why we are quik to be skeptical about any posted Project which does not follow the following guidelines.
2. as mentioned before, make sure you represent yourself in a profesional way. Provide us with details on you/your team/your company including current team members and their responsibilities, your website (if you have one; most games only have a website once their game is about to be published) and contact información.
3. present your game in a god way. That is to say, show us the game concept (including concept art, a plot concept and a game script concept) and the work in progress (models, screen shots, videos showing the game in action) which you already have. Even if you are recruiting, you must be able to probé that your game is not the dream of an overly-excited novato, so show us more than a dream. Give us a plan.
4. give us a reason to be interested in your game and/or participating in the creation of it. Tell us what your game is about, and what its major features Will be. Tell us who your audience is and what your plans are for when the game nears the end of its production. Using which medium Will the game be transported to the client? Will the game be free to play or Will you charge a single/monthly fe to play? Tell us about your goals in general. Make us anticipate the finished versión of the game.
5. if you are recruiting, tell us what in it for us. Many people ask for others to join their Project, but why should we? We Will not make your game, at least not for free.
6. pléase use proper grammar, spelling, syntax and punctuation. There is nothing worse than presenting yourself by misspelling a Word in every other sentence.

i hope this mensaje Will avoid any future flames caused by an inexperienced person beginning a game Project he cant handle (yet) and Will allow the profesional game developers to gain acceptance and support.
-the above was provided by Peter charlesworth vía the blenderartists forum.
downloading the correct versión of Blender.
this tutorial requires the use of Blender 2.42a or newer. If you have an older versión of Blender, por favor upgrade to this versión.
the basics of the Blender UI, and how to quickly use it.

https://www.foro3d.com/extras/tutori...e_engine_1.jpg

initial Blender screen setup
it is assumed at this stage that you have installed and downloaded Blender.
when you run Blender for the first time, you Will be presented with the screen to the right.

• the main menú panel is located at the top of the screen. The ge has its own game menú option here, which we Will have a look at later on.
• the main 3d view is shown as a área with a grid overlaid. It shows the current scene from the top.
• the menú for the 3d view is located below it.
• o at the bottom of the screen, you Will se the buttonshttps://www.foro3d.com/extras/tutori...e_engine_2.jpg
  
  Panel. Again, the ge has its own panel f4 (alos represented by a purple Pacman style icon.

) which again we Will come to later on.
taquíng a closer look at the default scene.
the default scene contains.

• a Cube - the square in the middle. This is selected, indicated by both having a Pink outline and by having a 3d transform manipulator (the arrows that you can drag to manipulate the object).
• a light - the small round object, with dashed line.
• and a camera - you can just about se this, clipped to the bottom of the screen.

interacting with the 3d scene.

Hold down the middle mouse button Mb.

1. https://www.foro3d.com/extras/tutori...e_engine_3.jpg
   
   And drag to rotate the scene. If you are on a portátil, or https://www.foro3d.com/extras/tutori...e_engine_4.jpg
   
   Have a mouse with just two mouse buttons, you can hold down Alt lmb.
2. to emulate the middle mouse button.

Rotate the view around until you are looking at the Cube from a top, left viewport, as shown in the image sequence below.

https://www.foro3d.com/extras/tutori...e_engine_5.jpg

You can a los zoom in and out on the 3d scene by scrolling the middle mouse whel Mbhttps://www.foro3d.com/extras/tutori...e_engine_6.jpg

https://www.foro3d.com/extras/tutori...e_engine_7.jpg

Or by.

Holding down Control Mb.

And moving the mouse up/down. To pan around the scene, hold down shift Mb.

https://www.foro3d.com/extras/tutori...e_engine_8.jpg

And move the mouse around.
changing the 3d scene to perspective mode.

https://www.foro3d.com/extras/tutori...e_engine_9.jpg

This current view is known as an orthographic view. It can be easier to view a scene in perspective mode, which takes into account depth.

https://www.foro3d.com/extras/tutori..._engine_10.jpg

To change into perspective, select view -> perspective option from the 3d view menú.

https://www.foro3d.com/extras/tutori..._engine_11.jpg

manipulating objects within the scene.

You Will be able to move objects around by clicking and dragging the handles on the 3d transform manipulator. Click and drag the handles on the box to move it around in the scene.

The move, rotate and scale 3d manipulators are shown below, along with a combo 3d manipulator that includes all thre.

https://www.foro3d.com/extras/tutori..._engine_12.jpg

Translate rotate.

https://www.foro3d.com/extras/tutori..._engine_13.jpg

Scale combo.

To change the 3d manipulator type, click on the icons shown below in the 3d view menú.

https://www.foro3d.com/extras/tutori..._engine_14.jpg

select manipulator icons.
https://www.foro3d.com/extras/tutori..._engine_15.jpg

Manipulator selection menú.

Another quik bien to change the 3d manipulator type is to press Control space and select translate, rotate and scale from the menú.

For ease of use, this tutorial Will focus on using the 3d manipulators to manipulate the objects in the 3d viewport. Other tutorialesyou Will read Will explain how to use the Grab, rotate and scale hot keys to manipulate objects without using the 3d manipulator.

For more información on the 3d manipulator you can refer to [URL=http://wiki.blender.org/index.php/manual/manipulator manual/manipulators[/url].
selecting other objects within the scene.

In Blender, clicking the right mouse button rmb.

1. https://www.foro3d.com/extras/tutori..._engine_16.jpg
   
   Over an object Will select it. Left-clicking lmb.
2. https://www.foro3d.com/extras/tutori..._engine_17.jpg
   
   Will position the Blender 3d cursor in the environment. New objects Will be added at the location of this 3d cursor.

Right-clik rmb.

https://www.foro3d.com/extras/tutori..._engine_18.jpg

On the Lamp to select it, and then move it around using the 3d manipulator. Right-click rmb.

On the box again to select it, and move it around again using the 3d manipulator.
adding and removing objects in the scene.

https://www.foro3d.com/extras/tutori..._engine_19.jpg

Removing the objects is easy, select an object, and press the del key.

To add an object to the scene, use the add menú item at the top of the screen, and then select the Mesh sub-option.

https://www.foro3d.com/extras/tutori..._engine_20.jpg

you can a los press the space key within the 3d view to display a menú with a number of useful functions, including the add menú.
this Will then allow you to add a number of simple (or primitive) models to the scene, including planes, cubes, spheres and cylinders. You can a los add Suzanne, a model of a Monkey head (primitive model / Monkey model, it a Blender developer joke) .
fixing newly added 3d objects.

https://www.foro3d.com/extras/tutori..._engine_21.jpg

the image sequence shows a Cube newly placed into the scene, and the steps required to have it placed in the scene as expected.
when you add a new object, Blender Will do two things.

• the new object Will automátically be placed in edit mode. Extensive editing of object meshes is outside the scope of this article, so for now you Will ned to press the tab key to toggle of edit mode and return to object mode, every time you add a new object into the scene.
• the new object Will initially be rotated as orientated to the current view.

this can be very confusing for new users, so always follow this sequence when you add a new object to the scene. You can press Alt r to clear the rotation on the object.
to summarise, every time you add a new object to the scene as part of this tutorial, immediately press tab followed by Alt r.
note - in the current cvs, the auto-editing and auto-rotating of models are optional, so this step Will son be unnecessary.
renaming objects.
when you add a new object, Blender Will assing it a default name (e. Cube, or Cube.001 if Cube already exists).
it is very god practice to rename your objects using more relevant terms, such as player, crate, pickup, etc. This Will make your scene a lot more readable when it gets more complex, as well as making it more readable for other people viewing it.
to rename an object, you can select the object panel, and change the name within the ob: área.
https://www.foro3d.com/extras/tutori..._engine_22.jpg

You can a los rename the object within the editing panel.

https://www.foro3d.com/extras/tutori..._engine_23.jpg

practice, practice, practice.
you should spend a bit of time getting used to navigating within the 3d viewport, and a los selecting and manipulating objects within the current environment. When you fel that you are comfortable with the basics of rotating around models with a 3d environment, and moving them to new locations, then continúe on to the next section of the tutorial below.
learning the basics of using the Blender Game Engine.

https://www.foro3d.com/extras/tutori..._engine_24.jpg

entering and exiting Game Engine mode using the p key
now that the basics of Blender have ben covered, we Will now focus on the ge related features of Blender. We Will start with the most important key in Blender, the one that starts the ge. Move your mouse cursor over the 3d scene, and press p to play the game. Enhorabuena, you have just played your first game within Blender. How easy was that?
As we havent told the ge to do anything yet, nothing Will occur within the scene. Press esc to return to Blender.
setting up the default scene.

https://www.foro3d.com/extras/tutori..._engine_25.jpg

before we start, reset the scene in Blender to get Bak to the defaults.
this can be done be either of the thre methods below.

• selecting the file -> new menú, and clicking on the erase all option.
• press Control x, and click on the erase all option.
• quit Blender (Control que - just que in 2.42 or older) and restart it.

it time to se how well you can use Blender, using the información you learnt from the previous section.
set up the 3d view in Blender to look like in the image.
to do this, you Will ned to carry out the following tasks.

• rotate the scene using the middle mouse button Mb.
• change the view into perspective mode using view -> perspective.
• add a Cube and a Lamp (assuming you deleted them previously and that they are not part of the default scene when Blender loads a new file).

https://www.foro3d.com/extras/tutori..._engine_26.jpg

a very useful keypress sequence when working with the ge.
one useful keypress to remember when working with the Blender ge is the one that maximizes the current 3d window.
move your mouse over the 3d window, and press Control cursor up (or Control cursor down). This Will make the current window scale to the full size of the Blender área. If you press Control cursor up again, the window Will be restored to its previous size and location.
Go ahead and practice this now:

• maximize the 3d window using Control cursor up.
• press p to play the current scene within the ge (nothing Will happen)
• press esc to return to modelling mode.
• restore the 3d window to it original size again using Control cursor up.

The image sequence below shows the effects of using the maximize/r estore keypresses within the default Blender screen setup.

https://www.foro3d.com/extras/tutori..._engine_27.jpg

Maximising the Blender panels using Control cursor up.
chosing the correct shading mode (or Draw type) for the ge.

https://www.foro3d.com/extras/tutori..._engine_28.jpg

Enter ge mode again by moving over the 3d panel and press p. You Will notice that the scene within the ge appears flat. Press esc to return to Blender.

Blender has a number of Draw types for the viewport that are useful for diferent tasks. The panel to change the current shading mode is shown below.

The image below show how the basic scene looks in the ge, in the various shading modes.

https://www.foro3d.com/extras/tutori..._engine_29.jpg

• solid mode doesnt take into account the lights in the scene.
• shading mode takes into account the lights in the scene.
• textured mode takes into account the lights in the scene, and a los shows any textures live in the viewport. This Will be as close to the actual in-game view as you can get, and should always be selected when you start a new ge Project.

the best Draw type for the ge is textured. Select this textured Draw type from the list, and press p again. You Will notice that the lighting afects the environment within the ge now, making it look more realistic. Always remember to set this option to textured if you play your scene in the ge and it appears flat.
the main game logic panel.
below the 3d window, you Will se the panel that contains Many diferent buttons for controlling diferent aspects of Blender.
you can view the panel reelated to the ge by clicking on the purple Pacman-like icon
https://www.foro3d.com/extras/tutori..._engine_30.jpg, just like below or by pressing f4.
https://www.foro3d.com/extras/tutori..._engine_31.jpg

the logic panel.
this panel is where you Will control what Will happen within your game.

Blender uses a visual click-and-drag system to create basic game interactions. This allows the ge to be used by 3d artists who may not have Access to a coder. Blender a los has a programming language, Python, which can be used to create more complex game interactions.
for the purposes of this tutorial, we Will focus on the visual system for creating games. When you have grasped the basics of using the Blender ge, you can then follow more advanced tutoriales showing how to implement Python scripting to create more complex games.
visually controlling the ge - sensors, Actuators, controller logic blocks.
the ge system uses logic blocks as a visual bien to set up interactions within the game. These logic blocks can be connected together visually to allow for complex game actions to take place.
there are thre diferent types of logic blocks - sensors, controllers and Actuators - each with a number of diferent sub-types.
https://www.foro3d.com/extras/tutori..._engine_32.jpg

sensors.

A sensor Will detect some form of input. This input could be anything from a keypress, a joystick button or a timer that triggers every single screen update (or frame) of the game.
controllers.

Controllers are used to enlace sensors to Actuators.

They allow for some more complex control over how sensor and actuadores interact with each other.

Actuators.

An actuator Will actually carry out an action within the game. This can include moving an object within a scene, playing an animation, or playing a sound effect.
setting up a basic sensor, controller, actuator logic block sequence.
We Will now set up a very basic system within the game panel by adding and connecting a sensor, controller and actuador together.

Ge panel: make sure the game logic panel is visible (click on the purple Pacman in the buttons window), and re-select the Cube within the 3d scene.

Below each of the 3 main sections, you Will se the selected object name, and an add button. Click this add button once for each of the 3 sections: sensor, controller and actuator.
We Will now connect this system together. Click and drag from the socket (small circle) at the end of the first sensor to the socket at the start of the controller. Then click and drag from the socket at the end of the controller to the socket at the start of the actuator.

The image sequence below shows the steps involved in setting up a simple sensor, controller, actuator chain and connecting them together.

https://www.foro3d.com/extras/tutori..._engine_33.jpg

press p to now play the game. You Will notice that, although we have added some control to the ge, nothing sems to happen again. This Will be explained in the next section. Press esc to return to Blender.
breaquíng down the events in the ge system.
we Will now look into what is happening with our newly created ge system.
the sensor is an always timer. This Will send out a signal every single frame, so the linked controller Will be activated continuously thoughout the duration of the game.
the controller is an and. When it has just one active sensor input (like in the current case), it Will automátically call the connected actuator.
the actuator controls the motion aspects of the selected object.
because of the always sensor connected to the controller, this actuador Will be called every single frame.
if we press p now, it is being called every single frame, but because all of the values are set to zero in the motion actuator, the object Will not move within the ge. Press esc again to return to Blender.

Making the default Cube move, using no physics.
we Will initially use direct manipulation to move the Cube within the scene. Later on, we Will set up a similar scene, but Will use physics to move the Cube around the environment. By using the built-in
physics engine (called bullet), more complex scene interactions such as collisions and Gravity Will be handled automátically.
have a look at the motion actuator, especially the 3 numerical boxes beside the dloc label. Each of the 3 boxes in this dloc área can be used to specify a change to the location of the object along the x, y or z axis specifically.
https://www.foro3d.com/extras/tutori..._engine_34.jpg

change the middle dloc numeric value (y axis, or forward) to be
0.1.

https://www.foro3d.com/extras/tutori..._engine_35.jpg

https://www.foro3d.com/extras/tutori..._engine_36.jpg

now press p. You Will notice that the Cube continually moves along the y axis. Press esc to return to Blender.
press p again and you Will notice that the exact same sequence of events in the ge occurs again. Press esc to return to Blender again.
to recap on what is happening in the ge - the timer (sensor) sends out a signal every frame to the Cube controller. This then sends the signal th rouge to the Cube actuator, which Will then call the motion object, which moves the Cube object 0.1 units in the y axis. As it is called every single frame, it loks like the Cube is continually moving. If you let this game run, the Cube Will eventually glide of to infinity. This is about as fun as watching Grass grow, so read on.
controlling the Cube vía the arrow keys.

https://www.foro3d.com/extras/tutori..._engine_37.jpg

In the example above, the timer is responsible for moving the Cube forward. We Will change this now, so that it is controlled using a keyboard press.

On the always sensor, click on the <> beside the always label. This Will bring up a list of the available sensor types.

https://www.foro3d.com/extras/tutori..._engine_38.jpg

Select keyboard from the list. The sensor Will now change to show the keyboard options.

This new sensor panel Will allow us to choose a key that neds to be pressed before a signal is sent to the controller, which in turn Will pass it on to the actuator.

Click on the button área beside the key label, and when it changes to say press a key, press the up, key.

https://www.foro3d.com/extras/tutori..._engine_39.jpg

press p to play the game again. The Cube Will not automátically move now. Press the up, key, and it Will start to move forwards. When you estop pressing the up, key, the Cube Will estop moving. Press up, again to move the Cube again. Press esc to return to Blender.
adding in additional keyboard controls.
we Will now add in the ability to move the Cube backwards, as well as rotating it, to allow you to move it around the 3d environment.
to add the ability to move backwards, we Will add in a new (but nearly idéntical) set of ge logic bricks. Click the add button again on the sensor, controller and actuator áreas, to create 3 new logic bricks on the ge panel. Connect these up as before.
note - you might want to use the Control up, key to maximise and restore the game logic panel when working in it, as it Will become cluttered very quickly.
With the newly added sensor, change it to keyboard type, and set it to use the down, arrow key. In the newly added motion actuator, change the y value (2, column) of the dloc área to be -0.1.

https://www.foro3d.com/extras/tutori..._engine_40.jpg

Press p to play the game. If the logic blocks are set up correctly, you should now be able to move the Cube forward and backward just by using the up, and down, arrow keys.

To complete this no physics part of the tutorial, we Will add in the ability to rotate the object as well, so that you Will be able to drive your model around the 3d environment.

Add in 3 new logic blocks as before, connect them up, and change the sensor type to keyboard. Set the keyboard entry to use the left, arrow key.

Now, in the motion actuator, we Will set it up to rotate the Cube. To do this, we Will rotate the object around its z axis. In the drot área, change the 3rd number (z) to be -0.1.

https://www.foro3d.com/extras/tutori..._engine_41.jpg

press p to play the game. When you click the left, key, the Cube Will rotate. When you press the up, arrow key, the Cube Will move forward in that direction. Press esc to return to Blender, and we Will add in the ability to rotate the other way.
as before, add in 3 new logic blocks as before, connect them up, and change the sensor type to keyboard.
set the keyboard entry to use the right, arrow key, and the z value (3, column) in the drot section in the motion actuador to be 0.1.
https://www.foro3d.com/extras/tutori..._engine_42.jpg

press p again to run the game. You can now drive the Cube around the 3d environment using the arrow keys. Note that you can add this game logic to any model in Blender (no matter what shape or size it is), and it Will move around just like the Cube. Press esc to return to Blender.
some ge house keping.
we Will now name some of the sensors and minimise them, to kep the game panel as uncluttered and readable as posible. This wont affect what the actual logic does, but it Will help kep the game logic área more manageable.
press Control up, in the game panel to make it full-screen.
in the first sensor panel, beside where it says keyboard, you Will se an área where the text sensor appears. This can be changed to someting more descriptive. Change this text to up key. Also, press the arrow button beside this to minimise the sensor panel.
repeat this for the other keys. Also, do the same in the Actuators, giving them a descriptive title (for example move forward, turn left).
https://www.foro3d.com/extras/tutori..._engine_43.jpg

press Control up, again to restore the game panel to its original size. As you can se, having the various blocks named make it a lot easier to figure out what is going on.
removing logic blocks and connections.

https://www.foro3d.com/extras/tutori..._engine_44.jpg

remove a logic block.
to remove logic blocks, press the x button at the top left corner of the logic blocks.
to remove the connections between logic blocks, move the mouse over the line connecting the blocks and press the del key.

Making the default Cube move, using physics.
one of the most powerful features of the Blender ge is the built-in physics engine (bullet).
by using forces to move an object around the scene, the physics system Will automátically handle complex interactions such as resolving collisions with other objects in the scene. For Many game types, using physics Will solve more complex issues, but it does require slightly more work to set it up.
we Will now create a basic game from scratch using physics. The scene Will consist of a sphere, which we Will move around the scene using Physical forces.
before we start, reset the scene in Blender to get Bak to the defaults, and set up the 3d view in Blender to look like the image below.
https://www.foro3d.com/extras/tutori..._engine_45.jpg

Set up Blender to look like this for the following tutorial.

• o select the file -> new menú, and click on the erase allhttps://www.foro3d.com/extras/tutori..._engine_46.jpg
  
  Option.
• rotate the scene using the middle mouse button Mb.
• change the view into perspective mode using view -> perspective.
• change the 3d view to use the textured shading mode (/Draw type)
• open the game (/logic) panel.

setting up the game scene.

To start creating the game scene, delete the Cube by pressing del.

• add in a sphere using add -> Mesh -> vSphere.
• when asked, select the default 32 segments and 32 rings as the setup of the sphere.
• exit edit mode straight away on the sphere by pressing tab, to return to object mode.
• also, press Alt r to clear the rotation on the object (the object must still be selected).

https://www.foro3d.com/extras/tutori..._engine_47.jpg

The scene.

Making a model Physical within the ge.

https://www.foro3d.com/extras/tutori..._engine_48.jpg

In the game panel, you Will se an unselected actor button.

https://www.foro3d.com/extras/tutori..._engine_49.jpg

Click on this button, and a number of other features Will become available for the selected model.

https://www.foro3d.com/extras/tutori..._engine_50.jpg

Select the Dynamic option - this Will tell the ge that the model is a Physical object. More options Will then a los appear.

https://www.foro3d.com/extras/tutori..._engine_51.jpg

select the following options.

• rigid body the Physical object Will automátically rotate correctly using the ge physics engine. If this isnt selected, the object Will be able to move, but not rotate.
• no sleping - the Physical object Will never be de-activated (alos known as sleping).

now, press p to enter the ge. You Will notice that, even though we havent added in any Game Engine logic blocks, the ball starts moving. This is because Gravity is afecting the ball, so it falls down. This illustrates one of the features of interacting within a Physical world. Press esc to go Bak to Blender. Press p again and youll notice that the same thing happens. Press esc to return to Blender.
we ned to add someting for the ball to fall onto, for example a Ground object.

• add a plane model to the scene using add -> Mesh -> plane.
• press tab to exit edit object mode, and return to object mode.
• press Alt r to reset the rotation on the model.

use the 3d transform manipulator to move the plane underneath the sphere, and press p. You Will notice that the Physical sphere now falls due to Gravity, but Will Land on the plane below it and come to a rest.
we Will now scale the plane up (s), so that we have plenty of rom to move the ball around within.
change the 3d transform manipulator from move mode into scale mode.

Grab the scaling handles and size the plane so that it is around 10 times larger in the x and y directions.
The image sequence below illustrates the sequence of steps indicated above.

https://www.foro3d.com/extras/tutori..._engine_52.jpg

Adding and placing a Ground object.
moving the Physical object within the ge.
We Will now apply Physical forces to the sphere, to make it move around the 3d environment.

Important - make sure the sphere model is selected. If you have just created the Ground plane model, it Will currently be selected, so you Will have to right-click on the sphere to re-select it.

Add in a new sensor, controller and actuador object in the game panel, and connect them together by clicking and dragging between the dots.

In the motion actuator, we Will ned to set the values in the force section in order to move the Physical object around the scene.
in the force section, set the 2nd value (y) to 1.
https://www.foro3d.com/extras/tutori..._engine_53.jpg

now press p. You Will then se that the ball falling onto the Ground / plane object, and starting to roll.

After the ball rolls a certain distance, you Will notice that it starts rolling Bak on itself. This is due to the fact that we are applying the force locally, along the balls y axis, as the ball rotates, it y axis a los rotates, as sen below. Press esc to return to Blender.
https://www.foro3d.com/extras/tutori..._engine_54.jpg

https://www.foro3d.com/extras/tutori..._engine_55.jpg

in order to fix this, we Will change the force movement from local to global. To do this, click on the l at the right of the force section to deselect it. Press p again, and you Will se that the ball continually moves in the correct direction.
you may not have noticed how the physics engine is working in the background.
as we apply a sideways force to the ball, it Will start to roll. This rolling is caused by friction between the surface of the ball and the Ground. Also, as the ball reaches the end of the plane, it Will realistically tip of the end of the object, and
continúes falling. These are a few of the advantages of using physics within the ge. Press esc to return to Blender.
controlling the sphere using the arrow keys.
we Will now take control of the sphere using the arrow keys. Change the always sensor to keyboard, and set it to use the up, arrow key.
Now, add and connect additional sensors, controllers and Actuators, where.

• the down, keyboard sensor controls the motion actuador with a -1 in the y (2nd) location of the force section (with l for local de-selected.)
• the left, keyboard sensor controls the motion actuador with a -1 in the x (1st) location of the force section (with l for local de-selected.)
• the right, keyboard sensor controls the motion actuador with a 1 in the x (1st) location of the force section (with l for local de-selected.)

https://www.foro3d.com/extras/tutori..._engine_56.jpg

when you press p again, you Will be able to control the ball and move it around the Ground plane. Press esc to return to Blender.
to make the game panel screen more readable, give the various sensors and actuadores suitable labels, such as up key for the first sensor, and push up to the first actuator.
also, try changing the values in all of the motion actuadores from 1 to 2, and from -1 to -2. Press p now, and you Will se the diference in the speed of the ball when using the arrow keys.
adding some obstacles into the level.
add a Cube to the environment, using add -> Mesh -> Cube. Press tab to exit edit mode and return to object model. Press Alt r to clear the rotation on the object, and drag the arrows of the 3d transform manipulator to place the box somewhere on the surface of the plane object. Repeat this step to add a few more objects to the surface of the plane, including cylinder and Monkey objects.
https://www.foro3d.com/extras/tutori..._engine_57.jpg

now, press p. You Will se that the ball Will automátically collide of the objects that you just added. Again, this is one of the advantages of using physics within the ge. Press esc to return to Blender.
you might want to try adding in planes and scaling them to make ramps and jumps.
if you have experience with editing models in Blender, you can spend some time now creating a more complex level layout. If you dont have experience modelling in Blender, hopefully this tutorial Will have given you an interest in Blender and learning more, including how to edit models. You can se some links to tutorialeson editing at the end of this tutorial.

Making some of the objects Physical.
select the Cube that you have added into the new scene. In the game panel, select the following options, the same ones that were set for the main sphere (except that no sleping is not selected this time, to allow the objects to settle and rest / slep - when an object is sleping, it takes less time to compute within the physics system) .

• actor.
• Dynamic.
• rigid body.

now, press p to play the game, and move the main sphere into the Cube. You Will se that the Cube now gets knocked out of the way.
however, the box moves in a very odd bien - it actually moves as if it was a sphere.
currently the physics system Will assume that a newly added rigid body Will have a spherical collision shape. Press esc to return to Blender.
https://www.foro3d.com/extras/tutori..._engine_58.jpg

You Will notice that there is a bounds button below the actor área. Click this button, and an additional dropdown Will appear, with the default setting of box.

In the case of the Cube, a box collision type Will work fine. However if you have a more complex shape, you Will want to select the Convex hull polytope option.

Select some of the other objects you have added to the scene, and carry out the same steps as above, selecting Convex hull polytope as the bounds type of the object.

Press p again to play the current level, and roll into the various Physical objects to move them out of the way. Press esc to return to Blender.
completion of the basic ge tutorial.

Congratulations on completing the basic Blender Game Engine tutorial.

You should now have a general overview of the basics of using the ge.

You Will have practical experience of.

• connecting sensors, controllers and actuadores in the game panel.
• using the motion actuador to move objects directly.
• using the motion actuador to move objects using Physical forces.
• taquíng keyboard control of game objects.
• creating a simple 3d game scene.
• Making new objects Physical within the ge.

With the skills you have learned so far, you Will be able to extend this simple environment as you learn more about modelling within Blender.
at this stage, you might want to recreate the final scene again, starting from scratch, to se how far you can get without reading the instructions. If you can recreate it all from memory, you are on your bien to becoming a true Blender ge power user.
The next few additional áreas below Will cover some more complex issues, such as making the ball Jump, and adding materiales to the scene.
creating more complex game levels and interactions .

Making the ball Jump.
we Will make the ball Jump when the space key is pressed.
add a new sensor, controller and actuador to the scene and connect them up. Change the always sensor to a keyboard sensor, and set it up to use the space key. In the force section of the motion actuator, set the 3rd value (z / up) to be 250. Also, click on the l
to turn it of, so that the force is applied along the global direction, rather than the local z direction. This Will give the ball quite a bit of a knock, making it look like it is jumping up in the Air.
https://www.foro3d.com/extras/tutori..._engine_59.jpg

press, and in the game, tap the space bar. You Will notice that the ball Will Jump directly up in the Air. However, if you continually hold down the space button, the ball Will continually go up in the Air.
we ned to add in an additional rule - the ball can only Jump when it is touching the Ground. To do this, we Will use the touch sensor.
add just an additional sensor to the scene, and change it to a touch type. Now, connect this sensor to the controller that the space keyboard sensor is connected to.
https://www.foro3d.com/extras/tutori..._engine_60.jpg

The controller Will only send a signal to the connected motion actuador (for the Jump action) when both space is pressed, and the ball is colliding with another object, such as the Ground.
restarting the game when a goal is reached.
When the ball touches a certain object, we Will set it to restart the level.

• add a new object into the scene, and place it somewhere near the main sphere (but not touching it).
• make sure the new object is selected (and not the main sphere).
• open the game logic panel, add a sensor, controller and actuador and connect them together.
• change the type of actuator to scene. The default setting of the scene actuador is restart.
• now, press p to play the game. It Will look like nothing is happening. However, as the always sensor is continually triggering the restart scene sensor.
• press esc to exit the game.
• change the sensor type to keyboard, and set it up to use the r key.
• press p again to play the game, and you Will be able to move the sphere around.
• pressing r Will restart the game, and allow you to continúe.
• press esc to exit the game.
• finally, change the sensor type again to touch.
• press p again to play the game. The scene Will restart now when you run into it with the sphere.
• press esc to exit the game.

https://www.foro3d.com/extras/tutori..._engine_61.jpg

https://www.foro3d.com/extras/tutori..._engine_62.jpg

https://www.foro3d.com/extras/tutori..._engine_63.jpg

this illustrates some basic Game Engine scene management. You could have the game go to a diferent scene (not covered in this tutorial) that might contain a game win or game lose sequence, or the scene might be an additional level of the game.
collecting pickups within the level.
we Will now add in an object that the player can collect when they move close to it.

• add a sphere to the scene, and place it at a reasonable distance from the main sphere.
• add and connect a sensor, controller and actuator.
• change the sensor type to near.
• change the actuator type to edit object.
• for edit object, change it from add object to end object.
• also, activate both the actor and the Ghost buttons. The Ghost object means that other objects (including the main player) Will not be able to collide with the object.
• press p now to play the game. When you move near the object, it Will now disappear (by ending itself).
• press esc to return to Blender.

https://www.foro3d.com/extras/tutori..._engine_64.jpg

counting the collected objects.
When a pickup is collected, we Will update a property value to reflect the total number of collected Items so far.
We Will use the message actuador to send a signal to another object in the scene, which Will have a message sensor. This sensor Will trigger an actuador that Will increase the value of a property.

• add another actuador to the pickup object, and change its type to message.
• connect this message actuador to the existing controller.
• set the subject name to be someting like pickup. It important to remember this name, as it Will be required for the message sensor later on.

https://www.foro3d.com/extras/tutori..._engine_65.jpg

when the near sensor is activated, then both of these actuadores Will be triggered, and the message Will be sent to all of the objects in the scene.
we Will use another object to estore the pickup count información. For this task, an Empty object is useful - this is an object that Will exist in the scene, but as it doesnt have any geometry it Will not be visible in the Game Engine.
https://www.foro3d.com/extras/tutori..._engine_66.jpg

Adding an Empty object.

O add an Empty object to the scene (adding an Empty object).

https://www.foro3d.com/extras/tutori..._engine_67.jpg

Add property.

• when this object is selected, click on the add property button in the game logic panel (se add property image).
• change the name of the newly added object to Items, and change the type from float to int (integer, or whole number, e. 0, 1, 2, 3). This is where we Will estore the number of Items collected so far.

https://www.foro3d.com/extras/tutori..._engine_68.jpg

activate show Debug properties .

• finally, press the d (for Debug) button to the right of the property. This Will allow you to se the value of the property in-game. In order to se the Debug properties in-game, select the show Debug properties menú option.
• press p to play the game now, and you Will notice some text in the top left corner of the 3d screen, showing the value of the Items property (currently set to 0).
• press esc to return to Blender.
• on the Empty object, add in a sensor, controller and actuator logic block sequence, and connect them together.
• change the sensor type to message, and set the subject name to pickup (the same name that you placed in the message sensor on the pickup object).
• change the actuator type to property, and change assing to add.
• change the prop name to items (the name of the property to add to), and set the value to 1.

https://www.foro3d.com/extras/tutori..._engine_69.jpg

https://www.foro3d.com/extras/tutori..._engine_70.jpg

Now, press p to play the game, and collect a pickup - you Will notice that, when you collect it, the value of the property increases. Press esc to return to Blender.

You can use the result of this property to affect your game, such as restarting or going to a new scene when a certain number of pickups are collected.
adding color to the levels using materials.
up until now, the added objects have used the default gray color. In order to change the basic look of the scene, we Will now change the colors of the models in the scene by creating new materiales for the them.

• o open the materials panel by clicking on the gray sphere on the panel (https://www.foro3d.com/extras/tutori..._engine_71.jpg) or by pressing f5, as shown below.
• select the main sphere model in the 3d view with a right click rmb.
• click on the add new button. This Will add a new material to the sphere model. A more complex set of panels Will appear. For now, we Will just change the color of the material.
• click on the área beside col, which indicates the main material color.
• a color picker Will then appear. Use it to choose a red color, and then move the mouse cursor away from the picker. The sphere Will appear red in the 3d viewport.
• repeat this process for some of the other models in the scene until they are all diferent colors.

https://www.foro3d.com/extras/tutori..._engine_72.jpg

https://www.foro3d.com/extras/tutori..._engine_73.jpg

https://www.foro3d.com/extras/tutori..._engine_74.jpg

Making a stand-alone versión of the game.

Blender allows you to create a stand-alone versión of your game to distribute to colleagues, without them having to have Blender installed. Your game Will automátically run when the programa is run.

In Blender, select file -> save runtime.

https://www.foro3d.com/extras/tutori..._engine_75.jpg

In the save screen, enter a name for the game executable (for example ball_game). This Will create a ball_game executable in that folder, which you can distribute to your friends.

https://www.foro3d.com/extras/tutori..._engine_76.jpg

note: you may ned to include a few other files along with that executable. Copy the file to a new folder and run it. If it gives an error that a file is missing, copy that file (probably a.dll file) into the same folder. Continúe this process until the game runs. You Will then be able to distribute those files to your colleagues.
overview of all of the sensor, controller and actuator logic blocks .
[URL=http://wiki.blender.org/index.php?Title=bsod/introduction_to_the_game_engine&action=edit&sectio n= sensors[/url].

https://www.foro3d.com/extras/tutori..._engine_77.jpg

• joystik - triggers when either a joystick button is pressed, or when a joystick is moved along a certain direction (left/right, up/down etc).
• message - triggers when a message is received. You can send messages to other objects using a message actuator.
• ray - this Will trigger when an object is detected along a certain axis. You can additionally chek for the detected object having a certain material or property value.
• random - triggers randomly - change sed for diferent sequence numbers (or use Python for real random Generator).
• property - triggers when a property changes, is between certain min and max values, or is equal or not equal to a certain value.
  
  • radar - triggers when an object is detected within a certain range (distance, and angle). You.
  • can specify a property that the detected object must have.
• near - triggers when an object is detected within a certain distance. You can specify a property that the detected object must have.
• collision - triggers when the object is in collision with another object. You can specify a material or a property that the collided object must have.
• touch - triggers when an object is touching another object. You can specify a property that the touched object must have.
• mouse - triggers when certain mouse events occur, such as mouse button clicks, mouse movement etc.
• keyboard - triggers when a certain key is pressed.
• always - triggers every single frame.

https://www.foro3d.com/extras/tutori..._engine_78.jpg

https://www.foro3d.com/extras/tutori..._engine_79.jpg

https://www.foro3d.com/extras/tutori..._engine_80.jpg

https://www.foro3d.com/extras/tutori..._engine_81.jpg

https://www.foro3d.com/extras/tutori..._engine_82.jpg

https://www.foro3d.com/extras/tutori..._engine_83.jpg

https://www.foro3d.com/extras/tutori..._engine_84.jpg

https://www.foro3d.com/extras/tutori..._engine_85.jpg

https://www.foro3d.com/extras/tutori..._engine_86.jpg

https://www.foro3d.com/extras/tutori..._engine_87.jpg

https://www.foro3d.com/extras/tutori..._engine_88.jpg

controllers.

https://www.foro3d.com/extras/tutori..._engine_89.jpg

• and - runs the connected actuador if all of the connecting sensors are triggered.
• or - runs the connected actuador if any of the connecting sensors are triggered.
• expression - evaluates an expression.

https://www.foro3d.com/extras/tutori..._engine_90.jpg

https://www.foro3d.com/extras/tutori..._engine_91.jpg

https://www.foro3d.com/extras/tutori..._engine_92.jpg

O Python - runs a Python script.

Actuators.

https://www.foro3d.com/extras/tutori..._engine_93.jpg

• visibility - show and hide the current object.
• game - restart and quit the current level. Can a los load a new scene.
• CD - allows for control over CD music Tracks.
• message - send a message to all objects, or to a certain object. This message Will trigger the message sensor.
• random - sets a random value into a property of the object.
• scene - allows for control over scenes - loading, playing, suspending etc.

https://www.foro3d.com/extras/tutori..._engine_94.jpg

https://www.foro3d.com/extras/tutori..._engine_95.jpg

https://www.foro3d.com/extras/tutori..._engine_96.jpg

https://www.foro3d.com/extras/tutori..._engine_97.jpg

https://www.foro3d.com/extras/tutori..._engine_98.jpg

this is very useful for showing diferent scenes, such as a start-up scene or menú. When the user wants to play the actual game, a keyboard sensor (e, g, press space to play) could be connected to a scene sensor, which would then load up the game scene.
this actuador a los allows you to specify what camera to look from, within a 3d scene.
https://www.foro3d.com/extras/tutori..._engine_99.jpg

• edit object - allows for control over adding, editing and deleting objects within the scene at run-time. This could be used to fire bullets from a weapon.
• it a los has an object tracking característica.

[*] property - sets the property value of the object (or of another object).[*] sound - allows you to control sounds from within Blender. Only sounds that have ben loaded into Blender Will be accesible.[*] camera - allows the camera to trak an object. The camera can be placed behind the object within a certain distance (min and max) and height.[*] IPO - allows control over playing object animations.[*] constraint - constrains the object position.[*] motion - allows control over the motion of the object. This includes direct positioning and rotating of the object (dloc and drot), as well as applying forces to a Physical object to move it (force and torque).[/list]
https://www.foro3d.com/extras/tutori...engine_100.jpg

https://www.foro3d.com/extras/tutori...engine_101.jpg

https://www.foro3d.com/extras/tutori...engine_102.jpg

https://www.foro3d.com/extras/tutori...engine_103.jpg

https://www.foro3d.com/extras/tutori...engine_104.jpg

https://www.foro3d.com/extras/tutori...engine_105.jpg

continuing your Blender Game Engine.
i hope you enjoyed learning the basic concepts of the ge. Hopefully you Will continúe to work
with the ge, using the basic skills you have learnt here, and improving them with plenty of
practice, and by learning from and sharing with members of the large ge community.
additional links and tutoriales.

Blender artists community forum - ge section.
this is one of the best resources for ge users.
if you want to ask any questions about how to do someting with the ge, mensaje some examples of
your current game, or just kep up to date on all things ge, this is the main place to visit.
[URL=http://blenderartists.org/forum/forumdisplay.php?f=3 http://blenderartists.org/forum/forumdisplay.php?f=34[/url][URL=http://blenderartists.org/forum/forumdisplay.php?f=3 [/url] .