-
7 Archivos adjunto(s)
Create a dice
create a dice (part 2).
. Bolean operations (continuing)
If you repeat bolean operations on a same object, you may have some Little problems, se this example:
Archivo adjunto 166879
The first face of my die has ben todo much subdivided and shows visual deffects.
Archivo adjunto 166880
I Will work face by face. You may use bolean operación on each side of the Cube.
Suppress the six Faces of the Cube, with the delete tool.
Archivo adjunto 166881
With the extract surface tool, you Will create again the deleted sides. You may now use bolean operations on each side, and then weld all these objects together.
Archivo adjunto 166882
Archivo adjunto 166883
Archivo adjunto 166884
Archivo adjunto 166885
My die is finished.
-- IMÁGENES ADJUNTAS --
https://foro3d.com/attachment.php?attachmentid=166879
https://foro3d.com/attachment.php?attachmentid=166880
https://foro3d.com/attachment.php?attachmentid=166881
https://foro3d.com/attachment.php?attachmentid=166882
https://foro3d.com/attachment.php?attachmentid=166883
https://foro3d.com/attachment.php?attachmentid=166884
https://foro3d.com/attachment.php?attachmentid=166885
